Bicycle: Page 2

We've seen lots of cool bicycles here on WonderHowTo, but somehow Michael Killian's sideways bicycle earns him circus freak status.

I'd take one of these:

Some people may not realize it, but getting your bike soakes in water can be a bad idea. Not only can it lead to rust, but certain parts and componenets can become damaged. This leads to you having to replace it sooner than later.

If you're having a hard time going up hills or being able to ride a bike for a long time, you may need some help. Performing leg exercises away from your bike can be a great way to help build endurance and strength.

There's nothing like taking a bice bike trip during the summer time. Not only do you manage to stay cool, but you can easily burn some calories away. But your mood can easily change when you get a flat tire.

If you've been experiencing a problem with shifting and hear a constant sound near your chain, you may have a stiff chain link. This should be addressed so that you no longer experience any problems with shifting that can result in possible injury.

If you're new to cycling and have no idea what truing is, then check out this tutorial. It's a procedure that is delicate and requires a good amount of time and patience. In order to do this you'll need a good stand, lighting, and a place where you'll enjoy working.

This next video is going to show you how to remove and install square-spindled crank arms. The tools you'll be needing for this project include either an 8 mm allen key or 14 mm socket wrench, crank puller, 16mm open-end wrench and an adjustable wrench.

If it's time for a new bike chain, you'll need to figure out how to determine how much length your bike will need for the chain. It's pretty easy to determine and can take around five minutes to help figure out what you need. So check out the tutorial, pay attention, and enjoy!

Most of the bikes out on the market either have a presta valve or a schrader valve. These are the gates to allowing and letting air out from your tires. Presta valves are much narrower than its counterparts and can usually be a bit more difficult to inflate.

When you are riding with a group or in a trafficked area, communicating with the people around you is essential for keeping all of you safe. This videos will explain the importance of good communication for riders and show some commonly used hand signals that you can use to signal your fellow riders. These will help you avoid obstacles and have the most fun ride you can.

The rear wheel of a bicycle is the more complicated to work with of the two because of it's position in the frame. If you have quick releases, it's still pretty easy to remove and reinstall. This video will show you how to do it step-by-step, and should have you back on the trail again in no time.

In this tutorial, we learn how to remove and install a free wheel. First, take out the skewer from the wheel. Then, take off the nut from the inside of the hub with a cone wrench. After this, go to the other side of the axle and loosen it up. Now place your free wheel tool onto the wheel. Firmly secure the free wheel tool onto the wheel until you're sure it won't come off, with any tools you have available. When you are finished, put your nuts and bolts back onto the axle, then use bicycle lube...

Keeping your bike in shape is the only thing that could help keep you in shape. Once its done, you have to pay tons of money to get it fixed, and in the meantime, you're off your bicycle, sitting on your couch, eating potato chips. To avoid this problem, a little bicycle maintenance goes a long way for the health of both you and your bike. This video will show you how to simply lubricate your bike (chains, gears, derailleur) with Tri-Flow and adjust the brakes.

In some places, it's illegal to ride your bike at night without lights or reflectors, so if you plan on going for a joyride on your street bike, then you need to be prepared to share the road with vehicles and be seen. Appropriate gear and lighting are essential for safety when riding a bike at night.

If you bike is shifting poorly, you may need to adjust your front derailleur. That's not good, because the front derailleur is not the easiest part of the bike to adjust. Fortunately, this video is here to help. It will show you how to adjust your front derailleur, restoring the smooth functionality of your transmission and ensuring that you continue to have good rides.

Finding the perfect seat and handlebar height on your bicycle can mean the difference between a comfortable and irritating riding experience. In this tutorial, Ryan from BeachBikes.com, shows you how to make sure your bike is the perfect size for your body so you aren't slipping and sliding while you try to ride.

In this clip, learn how to remove a back wheel and the three speed shifter on any beach bike. This clip, hosted by Stephan, will show you specifically how to remove the Shimano Nexus Internal 3 Speed Shifter and the entire rear wheel. He will also show you how to put it back together safely.

In this clip, learn how to mount a wire basket to the front of your beach bike so you can carry your towels, suit and whatever else you may need to bring with you this summer. Pete from BeachBikes.com will show you the quick and easy way to hook up a basket for all your carrying needs.

If you have recently ordered a new bike online, or purchased it at a store where it is not fully assembled, check out this clip.